background image

English - 18

4

Software Upgrade

Update the software 
to the latest version

 

To update later, 
select 

Skip

.

When 

Network Settings

 is complete, your TV will check for a new 

software version automatically. If new software is available, the TV 
downloads and installs the new software. When the download is 
complete, select 

Next

.

 

If you want to upgrade later, select 

Skip

. For more information, refer 

to 

Software Update

 (Preference Features 

 Support Menu) in the 

e-Manual.

 

This may take some time, depending on your network status.

 

You can only upgrade software if your TV has an active network 
connection.

 

If no new update software is available, a no new updates message 
appears on the screen. Select 

OK

.

5

Terms of Service 
Agreement

The 

Terms of Service Agreement

 screen appears.

 

The screen can take a few seconds to display.

The 

General Disclaimer

 screen appears. Select 

Agree

. The 

Privacy 

Policy

 screen appears. Select 

Agree

.

 

To use 

Smart Hub

, you must select 

Agree

 for the 

Terms of Service 

Agreement

.

6

Auto Program

 (1): 

Select where your 
TV signal comes 
from.

Select the appropriate option for your TV using your remote, and then 
select 

Next

.

 

I use an antenna cable connection to the TV.

: Select if you have an 

antenna or a cable connection without a set-top box. If you select this 
option, go to 7 - 

Auto Program

 (2) Step.

 

I use a set-top box.

: Select if you have a satellite or cable set-top 

box. You do not need to run 

Auto Program

. If you select this option, 

go to 9 - 

Clock

 on the next page.

7

Auto Program

 (2): 

Select the search 
options.

1. 

Select 

Air

 or 

Cable

 using your remote. A check appears on your 

selection. When done, select 

Next

. You can check both if you have 

both connected.

2. 

If you selected 

Air

, go to 8 - 

Auto Program

 (3).

3. 

If you selected 

Cable

, you’ll go to the cable system screen. Select 

Digital Cable System

. The option window appears. Select the 

correct cable signal format; 

STD

HRC

, or 

IRC

. Most cable systems 

use 

STD

 (Standard). Repeat the same process with 

Analog Cable 

System

.

4. 

When done, select 

Next

.

[UE8000-ZA]BN68-04033A-00Eng.indb   18

2012-03-03   �� 7:36:33

Summary of Contents for UN46ES8000F































































Reviews: