18
English
Basic Features
Multi-Track Sound (
MTS
)
t
(analog channels only)
■
Mono
: Choose for channels that are
broadcasting in mono or if you are having
difficulty receiving a stereo signal.
■
Stereo
: Choose for channels that are
broadcasting in stereo.
MTS
■
SAP
: Choose to listen to the Separate Audio Program,
which is usually a foreign-language translation.
✎
Depending on the particular program being broadcast,
you can listen to
Mono, Stereo
or
SAP
.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to
Normal
.
■
Night
: This mode provides an improved sound
experience compared to
Normal
mode, making almost
no noise. It is useful at night.
Speaker Select (External Speaker /
TV Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to
External Speaker
.
✎
When
Speaker Select
is set to
External Speaker
, the
volume and
MUTE
buttons will not operate and the
sound settings will be limited.
✎
When
Speaker Select
is set to
External Speaker
x
TV Speaker: Off , External Speaker: On
✎
When
Speaker Select
is set to
TV Speaker
x
TV Speaker: On , External Speaker: On
✎
If there is no video signal, both speakers will be mute.
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
■
Audio Format
: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options
PCM
or
Dolby Digital
.
■
Audio Delay
: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
Setup Menu
¦
Setting the Time
O
MENU
m
→
Setup
→
Time
→
ENTER
E
Time
■
Clock
: Setting the clock is for using various timer
features of the TV.
O
The current time will appear every time you press
the
INFO
button.
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
–
Auto
: Set the current time automatically using the
time from a digital channel.
✎
The antenna must be connected in order to set
the time automatically.
–
Manual
: Set the current time manually.
✎
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set
: Set the
Month, Day, Year, Hour, Minute
and
am/pm
manually.
✎
Available only when
Clock Mode
is set to
Manual
.
✎
You can set the
Month, Day, Year, Hour
and
Minute
directly by pressing the number buttons
on the remote control.
DST (Daylight Saving Time) (Off / On)
: Switches the
Daylight Saving Time function on or off.
✎
This function is only available when the
Clock
Mode
is set to
Auto
.
Time Zone
: Select your time zone.
✎
This function is only available when the
Clock
Mode
is set to
Auto
.
¦
Using the Sleep Timer
O
MENU
m
→
Setup
→
Time
→
Sleep Timer
→
ENTER
E
■
Sleep Timer
t
: Automatically shuts off the TV
after a preset period of time (30, 60, 90, 120, 150 and
180 minutes).
✎
To cancel the
Sleep Timer
, select
Off
.
[UC6400-6500-USA]BN68-02711E-03Eng.indb 18
2010-06-24 오후 1:18:13