background image

English - 17

3

a

Wireless Network

1. 

The TV searches for and then displays all the wireless networks 
within range. When done, it displays a list of the networks. In the list 
of networks, move the Highlight to select a network, and then select 

Next

. If the selected network requires a Security Key, the Security 

Key screen appears.

 

If you have a WPS(PBC) compatible router, select 

WPS(PBC)

 

instead, and then follow the directions on the screen. When 
done, go to Step 4.

2. 

Enter your network security key or WPS PIN using your remote.

 

Enter numbers and letters using your remote.

 

If you are using the standard remote, you can enter numbers 
by pressing the number buttons on the remote.

 

To enter a letter, move the Highlight to the letter, and then 
select it. You can enter numbers in the same fashion if you 
choose.

 

To display capital letters (or redisplay small letters if capital letters 
are displayed), select 

Caps

 or 

Shift

.

 

To display symbols and punctuation, select 1

F

. To redisplay 

letters, select 1

F

 again.

3. 

When done, select 

Next

 if you have entered a security key or 

WPS 

PIN

 if you have entered a WPS PIN.

4. 

The TV checks the wireless connection. If the connection is 
successful, the 

You are connected to the Internet. If you have any 

problems using online services, please contact your Internet 
Service Provider.

 message appears. Select 

Next

, and then go to 4 

Software Upgrade

 Step.

 

If the connection fails, select 

Previous

, repeat Step 1 and 2, 

carefully re-enter your security key or WPS PIN, then repeat 
Steps 3 and 4. If it fails again, select 

Next

 on the “Connection 

Failed” screen, and then go to 5 - 

Auto Program

 (1) on the next 

page. Configure your network later through 

Network Settings

 

in the TV’s Menu. For more information, refer to “Setting up the 
Wired or Wireless Network” in the e-Manual or see the Network 
Connection sections in this manual (pages 35 and 37).

3

b

Wired Network

The TV checks the network connection, then displays the 

You are 

connected to the Internet. If you have any problems using online 
services, please contact your Internet Service Provider.

 message 

appears. Select 

Next

. The 

Software Upgrade

 screen appears.

[UE8000-ZA]BN68-04495A-00Eng.indb   17

2012-06-21   �� 4:10:38

Summary of Contents for UN65ES8000F
































































Reviews: