Removing Excess Humidity
MODE TURBO OFF
MODE TURBO OFF
MODE TURBO OFF
If the atmosphere in your room is very humid or damp, you can
remove excess humidity without lowering the room temperature too
much.
1
If necessary, press the (On/Off) button.
Result:
◆
The OPERATION indicator on the indoor unit comes on.
◆
The air conditioner starts up in the mode selected when
the unit was last used.
◆
The indoor unit beeps.
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
◆
Plugged in
◆
Stopped
It will start up normally after a three-minute rest period.
2
If the indication is not displayed at the top of the remote control,
press the button on the remote control one or more times until it
appears.
Result:
◆
The indoor unit beeps each time you press .
◆
The air conditioner starts up in Dry mode.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
You can change modes at any time.
3
To adjust the temperature, press the or
buttons one or more
times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result:
◆
Each time you press or
:
- The temperature is adjusted by 1°C
- The indoor unit beeps
◆
The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
4
To control the direction of the air flow, refer to page 15.
IMPORTANT
IM
MODE
MODE
E-
13
ENGLISH
