36
GB
Modifying G-CODE Programming
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press M
ENU
a second time to confirm.
If you wish to...
Then...
Select an input source other
◆
Press the
¥
or
buttons, until the
PR
selection flashes.
than the tuner (LINE IN 1 or LINE IN 2)
◆
Press the INPUT SEL. button one or more times to change the
input source selection.
Result:
The programme number is replaced by:
•
The LINE IN 1 or LINE IN 2 source using the
INPUT SEL. button for a satellite tuner or
external video source
➢
The input source must be selected before changing any
other value.
Record a programme every day
◆
Press the
¥
or
buttons, until the
DAY
selection flashes.
(Monday to Sunday) at the same time
◆
Press the
or
buttons, until the
DLY
(Daily) value is
displayed.
Record a programme every week
◆
Press the
¥
or
buttons, until the
DAY
selection flashes.
on the same day and at the same time
◆
Press the
or
buttons, until the
W-
(Week) value is
displayed, followed by the required day.
Example:
W-SA
(Weekly Saturday)
Extend the recording time
◆
Press the
¥
or
buttons, until the
STOP
selection flashes.
◆
Press the
or
buttons to increase or decrease the stop
time.
Select the recording speed
◆
Press the
¥
or
buttons, until the recording speed selection
flashes.
◆
Press the
or
buttons until the correct indication is
displayed:
•
AUTO
(Auto Tape Speed Select) : see page 37
•
SP
(Standard Play)
•
LP
(Long Play)
VCR
00169N DVD-V70/XSA-GB2 11/14/05 10:11 AM Page 36