background image

NOTE :

When removing the power cord from the electrical outlet, grasp the plug, not the cord.

NOTE :

For your convenience, the handle has two functions. It can be used as a “handle” to carry
the unit.  It is also the cord rewind button that can be used to rewind the power cord.

POWER CORD

1) PULLING OUT

The power cord is long enough to be drawn
out for convenience.

2) REWINDING

When you have finished cleaning, disconnect
the plug from the electrical outlet and simply
press the cord rewind button lightly with your
toe.

ASSEMBLING THE VACUUM-CLEANER READY FOR USE

1) Connect the suction hose to the suction

tube.

2) Connect the suction tubes together (depend-

ing on model).

4) Grip the body connector with one hand and

squeeze the tube in an inward direction.

* Option 

 

Assemble the CYCLONIC FILTER with the handle 
and extension wand(depending on model).

 

Ajusting the telescopic tubes (depending on model).

3) Connect the nozzle to the suction tube.

3

*OPTION

EXTENDING : Holding narrow
side of the telescopic tube with a
hand, pull the hadle to the oppo-
site side of it with another hand.

SHORTENING : Push the han-
dle to the narrow side
of the tube, hoding

it with another
hand.

*OPTION

Summary of Contents for VAC-5900 Series











Reviews: