![background image](http://html.mh-extra.com/html/samsung/vac-9073r/vac-9073r_operating-lnstructions_358034007.webp)
-6
EN
VACUUMING WITH THE POWER BRUSH
1. Attaching the Power Brush
The hose must be plugged into the canister and the power brush
must be plugged into the hose and extension wand (see page 3).
2. Vacuuming
●
For best results, move the power brush slowly using short,
overlapping strokes.
●
For heavily soiled areas, repeat strokes in several directions.
●
Turn height adjustment knob to match the surface being cleaned.
3. Checking the Performance of the Power Brush
You may check whether the power brush is operating correctly by lifting up the extension tube slightly
to view the back of the brush.
The Power Brush will not operate when it is jammed or the unit is turned off.
If the Power Brush is jammed, Unplug the power cord from the electrical outlet. Turn the power brush over
and remove the jammed object.
Turn the power brush back to vacuuming position and resume vacuuming.
CAUTION:
Do not invert the power brush while it is running
MAINTAINING THE POWER BRUSH
2) Remove the old bulb from the bulb socket.
Insert the new bulb. You can use a vacuum
cleaner lamp rated 120V, 20W.
1) Remove the Brush Cover as
described below.
1. Removing the Brush Cover
●
Before replacing any parts, unplug the vacuum
cleaner from the electrical outlet.
●
Remove 6 screws from the bottom plate and
open the brush cover.
2. Replacing the Headlight Bulb(optional)
Summary of Contents for VAC-9073R
Page 20: ...DJ68 40015P REV 0 0 ...