-7
EN
2) Remove the flat belt from the motor shaft and the
brushroller. Loop the new belt around the motor
shaft and then loop it around the brushroller.
4) Be sure that the belt is not twisted. Rotate the belt
3 or 4 times to position it correctly on the roller and
to make sure all rotating parts move smoothly.
Replace the brush cover.
3) Reinsert the brushroller, making sure that both
ends of the brushroller are fitted into the grooves
of the nozzle head.
1) Remove the brush cover. Grasp the
brushroller firmly, and pull it out.
Use with caution when replacing the belt that drives the brushroller. Tension on the belt is high.
1) Turn off the vacuum cleaner and unplug the
power cord.
2) Remove the cover to expose the brushroller.
3) Cut off any lint, carpet pile or hair that has
accumulated around the brushroller with a pair
of scissors. Replace the brush cover.
3. Replacing the Brushroller Belt
4. Cleaning the Brushroller
Summary of Contents for VAC-9073R
Page 20: ...DJ68 40015P REV 0 0 ...