GB-6
MAINTENANCE OR REPLACEMENT OF THE FILT E R S
1) INLET-FILTER.
• Open the dust cover.
• After detaching the filter, wash it lightly with-
water, dry it in the shade, and then insert it in
its original position.
•Close the dust cover.
2) OUTLET-FILTER.
•To open the filter cover, press front and pull it
simultaneously.
•Remove and replace the dirty microfilter.
•Close the cover.
FOR CLOTH FILTER BAG
After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.
3) After removing the used dust bag,
insert the cardboard bag collar of the
new dust bag into the carrying bag.
4) Press the dust cover down gently
until the clamper relocks.
NOTE :
Used dust bag can be sealed by
removing the film from the paper
and sticking the latter over the
suction opening. (ONLY PAPER BAG)
VC-6000-EN 4/24/01 9:05 AM Page 9
