➀
➁
➂
➃
1. Slide the free end of the extension wand into the nozzle tube.
2. Slide the narrow end of one extension wand into the other
extension wand.
3. Slide the extension wand into the handle end of the hose.
4. Slide the hose clamp into the suction inlet of the unit.
* Option
➀
Assemble the CYCLONIC FILTER with the handle
and extension wand(depending on model).
➁
Ajusting the telescopic tubes (depending on model).
ASSEMBLING THE VACUUM-CLEANER SO THAT IT IS READY FOR USE
USAGE OF FLOOR NOZZLE
Select the carpet indicator
➀
when cleaning carpets.
Select flat surface indicator
➁
when cleaning the floors,
tiles, etc.
FOR RUG / FLOOR SELECTOR
Before use make sure that the position of the selector is in the right position for the type of surface to be
cleaned.
FOR UNIVERSAL BRUSH
Use the floor nozzle for all cleaning surfaces.
NOTE:
For optimum efficiency, clean floor brush with crevice tool.
*OPTION
➀
➁
➀
*OPTION
➁
EXTENDING : Holding narrow
side of the telescopic tube with a
hand, pull the hadle to the oppo-
site side of it with another hand.
SHORTENING : Push the handle
to the narrow side
of the tube, hoding
it with another
hand.
3
EN
D00053T(EN)-(0.0) 5/12/03 2:18 PM Page 4
