EN-3
DUST-FULL INDICATOR
If the “Dust-Full” indicator switches to “RED” while you are cleaning, the dust bag requires
replacement.
NOTE:
If the “Dust - Full” indicator continues to display “RED” even after changing the dust
bag, turn the cleaner off to see if the hose, tube or nozzle is clogged.
POWER CORD
1) PULLING OUT
The long power cord can be drawn out for
your convenience.
2) REWINDING
After disconnecting the plug from the electri-
cal outlet, press the cord rewind button light-
ly with your toe. The cord will automatically
rewind.
NOTE:
When removing the power cord from the electrical outlet, grasp the plug, not the cord.
ON/OFF SWITCH
You can start or stop your vacuum cleaner by
pressing the on/off switch lightly with your toe.
CORD REWIND
ON/OFF SWITCH
➀
➁
➂
➃
1. Slide the free end of the extension wand into the nozzle tube.
2. Slide the narrow end of one extension wand into the other
extension wand.
3. Slide the extension wand into the handle end of the hose.
4. Slide the hose clamp into the suction inlet of the unit.
* Option
➀
Assemble the CYCLONIC FILTER with the handle
and extension wand(depending on model).
➁
Ajusting the telescopic tubes (depending on model).
ASSEMBLING THE VACUUM-CLEANER SO THAT IT IS READY FOR USE
*OPTION
➀
*OPTION
➁
EXTENDING : Holding narrow
side of the telescopic tube with a
hand, pull the hadle to the oppo-
site side of it with another hand.
SHORTENING : Push the handle
to the narrow side
of the tube, hoding
it with another
hand.
DJ68-00079Q-TR+EN(0.2) 4/7/04 11:18 AM Page 11
