USING THE MITE KILLER
(OPTIONAL)
Located on the rear side of the cleaner.
4
USING THE BLOWER
(EXCEPT HANDLE CONTROL TYPE)
To blow out dust in crevices or corners you can use this function for your convenience.
1) Disconnect the body connector from the body
of the cleaner.
2) Shut the hose connection cover until tone is
heard.
• Your vacuum-cleaner is not malfuctioning if it
starts to operate when the hose connection
cover is closed. This will happen if the
vacuum-cleaner was on when the hose was
removed.
3) Mite killer lamp on.
Insect and germ killing work is started.
It will continue for 2 to 5min and the process
stops automatically.
MITE KILLER LAMP
HOSE CONNECTION COVER
1) Disconnect the hose clamper from the
body of the cleaner.
2) Open the tool storage cover.
3) Remove the blow hole cap from the
body of the cleaner.
4) Connect the hose clamper to the blow
hole.
NOTE:
Don’t use your vacuum-cleaner outdoors.
DJ68-00079P(0.0) 4/23/02 8:54 PM Page 5
