![background image](http://html.mh-extra.com/html/samsung/vc-ra84v-series/vc-ra84v-series_operation-manual_358163040.webp)
39
If service is requested when it is not a case of failure, the service charge
will be requested, therefore, read the operation manual carefully.
Always confirm these before
reporting the failure.
Symptom
Confirmation
Corrective measures
The robotic vacuum
cleaner doesn’t
move at all before
the cleaning.
▶
Has the dust bin been assembled?
▶
Has the emergency switch been
turned on?
▶
Has the cleaning mode
of state
indicating window been turned on?
▶
At the state indicating window, is the
“LO” indicated at the one column while
flickering at the battery remaining
amount?
▶
If the dry cell of the remote controller
has been discharged, the operation will
not be conducted.
▶
Assemble the dust bin.
▶
Turn on the emergency
switch.
▶
Press the
button. (When
turning it off, press the
button for more than 3
seconds.)
▶
Move the robotic vacuum
cleaner to the charger and
conduct the charging.
▶
Exchange the dry cell. (AAA
type)
The robotic vacuum
cleaner doesn’t
move during the
cleaning.
▶
At the state indicating window, is
the “LO” indicated at the one
column while flickering at the
battery remaining amount?
▶
Is the robotic vacuum cleaner
being caught to the cable on the
floor?
▶
Is the robotic vacuum cleaner
being caught to the floor with
difference of height?
- Driving wheel is being lifted.
▶
Is thin towel (cloth) being wrapped
in the driving wheel?
▶
Is the robotic vacuum cleaner
being caught to the threshold?
▶
Move the robotic vacuum cleaner
to the charger and conduct the
charging.
▶
After turning off the emergency
switch, remove the cable on the
floor.
▶
After turning off the emergency
switch, move the robotic vacuum
cleaner to other place.
▶
After turning off the emergency
switch, remove the thin towel.
▶
After turning off the emergency
switch, move the robotic vacuum
cleaner to other place.
Suction force
becomes weakened
during the cleaning.
▶
Confirm whether there is
some dust at the dust bin
inside.
▶
Confirm whether suction port
has been blocked by foreign
material.
▶
Confirm whether dust is
accumulated at the HEPA filter
▶
Stop the robotic vacuum cleaner
and empty the dust bin.
▶
After turning off the emergency
switch, remove the foreign
material from the suction port.
▶
Neatly clean the HEPA filter.
Confirming items befor
e
reporting the failur
e
others
DJ68-00517A-고급형(EN).indd 39
2010.5.6 1:34:5 PM