Chapter 1 Getting Started
Verizon 4G LTE Network Extender User Guide v1.3
4
©Samsung
Network Extender Basics
This section will guide you through the basic features and functions of your
Network Extender.
The included GPS antenna is required for the automated setup process and is
necessary in the event the mobile phone is used to call for emergency services
while in the coverage area of the Network Extender.
Figure 4. Components - Front and Rear View
The Network Extender includes the following key features and connections:
1
Power/Status Indicator
shows the unit is on and in service.
2
LCD Display
shows status messages and device icons indicating the number
of LTE devices connected to the Network Extender and the number of GPS
satellites tracked.
3
Display Button
scrolls the LCD display to provide additional information
about the device when in operation.
4
GPS Antenna
is located under the GPS antenna cover on the top right of the
Network Extender. Slide the cover open to provide access to the GPS antenna
so it can be relocated if needed
.
See the Configuring Your Device chapter
.
5
LAN Port
allows you to connect an Ethernet cable to establish communication
between the Network Extender and your broadband router. This connection
port is then used to transmit voice and data through the Internet to the Verizon
wireless network.
6
Reset Button
allows you to reset the device to factory default settings. Use a
pen to push and hold the reset button for 10 seconds. The Power/Status
Indicator will then become solid blue, indicating that the device is resetting.
Any manually configured parameters will require reconfiguration.
7
12V DC Power Input
is used
to power the Network Extender when connected
to the AC power adaptor. Use only the provided power adapter as using any
other power source may damage the Network Extender
.
For advanced users only. Depress for 10 seconds
to reset to factory default.
