ENGLISH
15
15
Preparation
Lithium Battery Installation
Lithium Battery Installation for the
Internal Clock
1. Remove the Battery Pack from the rear of
the Camcorder.
2. Open the Lithium Battery Cover on the rear
of the Camcorder.
3. Position the Lithium Battery in the Lithium
Battery Holder, with the positive (
)
terminal face up.
Be careful not to reverse the polarity of the Battery.
4. Close the Lithium Battery Cover.
Lithium Battery Installation for the
Remote Control (VP-D363(i)/
D364W(i)/D365W(i) only)
1. Pull out the Lithium Battery Holder toward
the direction of the arrow
using instruments such as a pair of tweezers.
2. Position the Lithium Battery in the Lithium
Battery Holder, with the positive (
) terminal face up.
3. Reinsert the Lithium Battery Holder.
Precaution regarding the Lithium Battery
1. The Lithium Battery maintains the clock function and preset contents
of the memory; even if the Battery Pack or AC Power adapter is
removed.
2. The Lithium Battery for the Camcorder lasts about 6 months under
normal operation from time of installation.
3. When the Lithium Battery becomes weak or dead, the date/time
indicator will display
<00:00 1.JAN.2006>
when you set the
<Date/Time>
to
<on>
. When this occurs, replace the Lithium Battery
with a new one (type CR2025).
4. There is a danger of explosion if Battery is incorrectly replaced.
Replace only with the same or equivalent type.
Warning: Keep the Lithium Battery out of reach of children. Should
a battery be swallowed, consult a doctor immediately.
1.
2.
3.
4.
VP-
D363(i)/D364W(i)/D365W(i)
1.
2.
3.
1.
2.
6
3.
00:00 1. 1,2006
4.
MENU
CHG
QUICK
MENU
Summary of Contents for VP-D36 Series
Page 106: ...H AMCORDER IS MANUFACTURED BY ...