background image

ENGLISH

113

113

Digital Still Camera Mode : Advanced Techniques 

Macro Mode function works in 

(Programme), 

(Movie), MySET, M, S, A and

SCENE(CLOSE-UP only) modes.

The Macro Focusing mode allows the user to take a close-up image of a detailed subject.

Your camera can focus on subjects as close as 4cm (about 1.57 inches).

1. Set the Power switch to 

(CAMERA).

2. Set the Mode Dial to 

(Programme), 

(Movie), MySET, M, S or A.

3. Move the Joystick to the right.

The Macro mode (

) icon will be displayed.

4. Frame your subject and close-up by zooming in or out if required.

5. Press the PHOTO button to take the close-up picture.

6. To exit Macro mode, move the Joystick to the right again.

The Macro mode (

) icon will be disappeared.

Modes and Focusing Distances Supported

[ Notes ]

Be careful not to cast a shadow over your subject when recording in Macro Mode.

When you cannot get proper focus on the subject, zoom in or out to obtain clear focus.

The LCD screen displays your framing more precisely.

Macro is set automatically in CLOSE-UP preset scene mode.

Macro Mode

Modes

Distance

80cm ~ Infinity
31.5 inch ~ Infinity

W: 4 ~ 80cm
W: 1.6 ~ 31.5 inch

T: 30 ~ 80cm
T: 11.8 ~ 31.5 inch

Normal

Macro (W: Wide, T: TELE)

1

3

2592

10

12:00 AM
2005.01.01

Summary of Contents for VP-D6550

































































































































































Reviews: