background image

Alignment and adjustment

5-30

Samsung Electronics

15. B-Y Negative Hue

1) Camera ÒE-EÓ, 3100¡K color bar chart.
2) Video(output) jack and register of EEPROM.
3) Connect video(output) jack to vectorscope input

jack and monitor TV jack respectively.

4) Press the ÒMENU (MODE UP)/DATE

(MODE DOWN)Ó button so that the OSD state is
Ò34 CHYE XX XXÓ.

5) Aim the camera at a color bar chart illuminated at

1500 to 2000 lx.

6) Adjust the ÒDISPLAY (DATA UP)/ C.RESET 

(DATA DOWN)Ó button so that the yellow
vector is 165.

7) Be sure to press the ÒTITLE (CONFIRM)Ó

button to memorize setting.

8) The OSD shows ÒOK!Ó.

YELLOW VECTOR
165 DEG.

16. B-Y Positive Hue

1) Camera ÒE-EÓ, 3100¡K color bar chart.
2) Video(output) jack and register of EEPROM.
3) Connect video(output) jack to vectorscope input

jack and monitor TV jack respectively.

4) Press the ÒMENU (MODE UP)/DATE

(MODE DOWN)Ó button so that the OSD state is
Ò35 CHB XX XXÓ.

5) Aim the camera at a color bar chart illuminated at

1500 to 2000 lx.

6) Adjust the ÒDISPLAY (DATA UP)/C.RESET

(DATA DOWN)Ó button so that the blue vector is 
346.

7) Be sure to press the ÒTITLE (CONFIRM)Ó

button to memorize setting.

8) The OSD shows ÒOK!Ó.

BLUE VECTOR
346 DEG.

Summary of Contents for VP-L100

















































































































































Reviews: