ENGLISH
23
23
How to Use the Battery Pack
Charging the Battery Pack
1. Attach the Battery Pack to the CAM.
2. Move [POWER/MODE Selector] up to turn the CAM off.
3. Connect the AC Power Adapter with the CAM.
◆
You can detach the AC adapter by pressing the buttons on the sides of
the adapter cable plug while pulling it out.
4. Insert the AC Power Adapter into the outlet.
✤
You can charge the Battery Pack when you use the CAM, but it takes a long time
relatively.
✤
It is recommended you fully charge the Battery Pack before use.
✤
You should only charge the battery in an environment between 0
°
C and 40
°
C.
Warning
Note
Charging directly to the CAM
Using Hardware Reset Function
1. Remove the Battery Pack and the AC Power Adapter.
2. Press and hold the [RESET] button over one second.
✤
If you reset the CAM, all functions you set are initialized.
Note
4
3
1
00906B VP-M2100 UK~035 9/28/05 9:22 PM Page 23