21
20
Copying or Dubbing
Copying or Dubbing a Video
Audio
The VCR can record a program in stereo. It can also be set to record the Secondary Audio Program (SAP) of any broad-
cast with second language audio. The VCR records the same audio on both the Hi-Fi and linear tracks on the tape.
Stereo Programs
1
Set the audio out to STEREO in the VCR Function
Setup menu (See page 11).
You can also select LEFT, RIGHT or MONO.
Note: When the stereo sound is poor.
Select MONO for sound without noise.
To Record SAP Programs
2
Set the audio out to SAP in the VCR Function Setup
menu. “SAP” will be displayed on the TV screen when a
SAP broadcast is received. Press the REC button for
SAP recording.
*When “MAIN” is displayed, stereo is selected.
Selecting Playback Sound with Hi-Fi Tapes
3
During playback, set the Audio to HI-FI, LEFT,
RIGHT or to MONO. When playing a tape that is not
Hi-Fi, this function will have no effect.
((STEREO))
Choosing Audio (VR8140C)
((LEFT))
((RIGHT))
((MONO))
((SAP))
((MAIN))
((MONO))
((HI FI))
((LEFT))
((RIGHT))
((MONO))
To make a copy, or “dub” of a video, you need two VCRs and two RCA-type cables.
Warning: One Federal Court has held that unauthorized recording of copyrighted TV programs may be an infringement
of copyright laws.
1
Attach one end of the Video cable to the Video OUT
jack of the playback VCR and the other end to the Video
In jack of the record VCR.
2
Attach one end of the Audio cable to the Audio OUT
jack(s) on the playback VCR, and the other end to the
Audio IN jack(s) on the record VCR.
3
Set your Samsung VCR to record, and the other
VCR to play back. Press the CH/TRK
▼▲
button to
select the LINE jacks on the rear of the VCR.
4
Press play on the playback VCR, and record on the
recording VCR.
Note: Rental tapes with Copyguard protection cannot
be copied. Before you copy a rental tape, check
first.
LINE
VR8140C
Video signal
ideo signal
Audio signal
Audio signal
RECORD VCR (SAMSUNG)
PLAYBACK VCR
VR5140C
RECORD VCR (SAMSUNG)
RECORD VCR (SAMSUNG)
