12
VCR Setup
Tape length
1
Press the MENU button on the remote control. Press
▼
to select VCR Function Setup, then press
❿
.
2
Press
❿
to select the video cassette length.
This information is usually printed on the tape box.
The menu cycles through: T120, T160 or T180.
Once the type of cassette is set, the VCR can
display the amount of time remaining on the tape
when you press the DISPLAY button.
3
Press the MENU button when you are finished.
Auto play
Access the “VCR FUNCTION SETUP” menu as
described above. Press
▼
to set the cursor to “Auto
play”, then press
❿
to set ON or OFF. When “Auto play”
is ON, the VCR will automatically begin playing a video
tape when it is inserted, as long as the safety tab of the
cassette has been removed (see page 10). Press the
MENU button on the remote control when you are fin-
ished.
Auto repeat
Access the “VCR FUNCTION SETUP” menu.
Press the
▼
and
❿
buttons to set “Auto repeat” ON or
OFF. In the VCR FUNCTION SETUP “Auto repeat” sets
the VCR to play a tape repeatedly [unless a tape control
is activated (stop, fast forward or rewind)] . Press the
MENU button on the remote control when you are
finished.
Auto power off
Access the “VCR FUNCTION SETUP” menu.
Press
▼
and
❿
to set “Auto power off” to 1Hr or 2Hr.
“Auto power off ” sets the VCR to turn off automatically.
Note: VCR will shut off 1 or 2 hours after the last button is pressed.
Record speed:
[SP]
Audio output: [MAIN]
Tape length: [T120]
Auto play: [ON]
Auto repeat: [OFF]
Auto power off: [OFF]
VCR output CH: [3CH]
[
❷
%
/
❿
]
[MENU/EXIT]
Record speed:
[SP]
Audio output: [MAIN]
Tape length: [T120]
Auto play: [ON]
Auto repeat: [OFF]
Auto power off: [OFF]
VCR output CH: [3CH]
[
❷
%
/
❿
]
[MENU/EXIT]
Record speed:
[SP]
Audio output: [MAIN]
Tape length: [T120]
Auto play: [ON]
Auto repeat: [OFF]
Auto power off: [OFF]
VCR output CH: [3CH]
[
❷
%
/
❿
]
[MENU/EXIT]
Record speed:
[SP]
Audio output: [MAIN]
Tape length: [T120]
Auto play: [ON]
Auto repeat:
[OFF]
Auto power off: [OFF]
VCR output CH: [3CH]
[
❷
%
/
❿
]
[MENU/EXIT]
VCR FUNCTION SETUP
VCR FUNCTION SETUP
VCR FUNCTION SETUP
VCR FUNCTION SETUP
❿
❿
❿
❿
VCR Setup
13
Setting the VCR Output CH
1
Access the VCR Setup menu. Press
▼
to select VCR
Output Channel.
2
Press
❿
to toggle between VCR output CH3 and CH4.
3
Press MENU 2 times to exit menu, if your TV channel
does not match the VCR output channel, the message
at right will appear. Set the TV channel so it matches
the VCR output channel.
Note: The VCR output Channel is set to 3 at the factory.
Record speed:
[SP]
Audio output: [MAIN]
Tape length: [T120]
Auto play: [ON]
Auto repeat: [OFF]
Auto power off: [OFF]
VCR output CH: [3CH]
[
❷
%
/
❿
]
[MENU/EXIT]
VCR FUNCTION SETUP
❿
VCR Out channel is
changed to CH4.
Set TV channel again
