16_
Washing a load of laundry
Child lock
A function that prevents children from playing with your washer.
Once the Child Lock function is activated, the control panel cannot be activated, preventing
children from playing with the washer.
ACTIVATING/DEACTIVATING
If you want to activate/deactivate the Child Lock function, press the
Spin
and
Soil Level
buttons
at the same time for 3 seconds.
How It works:
1.
“
Child Lock”
can be activated and deactivated while your washer is running.
2.
Once you activate
“Child Lock”
, all controls (except for the
Power
button) will be locked
until you deactivate
“Child Lock”
.
3.
The
Child Lock
button will be lit while it is in effect.
When buttons, other than the
Power
button, do not respond, please check if the
“Child
Lock”
function is on.
You can add or take out laundry items even after the wash has started, as long as the
“
()”
light is on. Pushing the
Start/Pause
button unlocks the door, unless the water is
too hot or if there is too much water in your washer. If you are able to unlock the door and wish
to continue the wash cycle, close the door and press the
Start/Pause
button.
My cycle
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one–button
convenience.
By pushing the
My Cycle
button, you activate the settings used during the
My Cycle
mode.
The
“My Cycle”
light will indicate activation.
You can select all options as follows in the
“My Cycle”
mode.
1.
Select cycle using the
Cycle Selector
dial.
2.
After cycle selection, set each option.
See page 28 for available option settings with each cycle.
3.
Then, you can start
“My Cycle”
by pushing the
Start/Pause
button in
“My Cycle”
mode.
The cycle and options you select will be displayed the next time you choose
“My Cycle”
.
You can change the
“My Cycle”
settings by repeating the same process above.
The last used setting will be displayed the next time you choose
“My Cycle”
.
washing a load of laundry
BEST-WF419AAW-02657A_EN.indd 16
2009-02-18 ¿ÀÈÄ 3:26:47
