troubleshooting and information codes
_29
04 TROUBLESHOOTING
troubleshooting and
information codes
CHECK THESE POINTS IF YOUR WASHER…
PROBLEM
SOLUTION
Will not start.
•
Make sure the door is firmly closed.
•
Make sure your washer is plugged in.
•
Make sure the water source faucets are open.
•
Make sure to press the
Start/Pause
button to start your washer.
•
Make sure the Child Lock is not activated (page 20).
•
Before your washer starts to fill, it will make a series of clicking noises
to check the door lock and do a quick drain.
•
Check the fuse or reset the circuit breaker.
Has no water or not enough
water.
•
Turn both faucets on fully.
•
Make sure the door is tightly closed.
•
Straighten the water inlet hoses.
•
Disconnect hoses and clean screens. Hose filter screens may be
clogged.
•
Open and close the door, then press the
Start/Pause
button.
Has detergent remains in
the automatic dispenser
after the wash cycle is
complete.
•
Make sure your washer is running with sufficient water pressure.
•
Make sure the Detergent Selector dial is in the upper position when
using granular detergent.
Vibrates or is too noisy.
•
Make sure your washer is set on a level surface. If the surface is not
level, adjust your washer feet to level the appliance.
•
Make sure that the shipping bolts are removed.
•
Make sure your washer is not touching any other object.
•
Make sure the laundry load is balanced.
Stops
•
Plug the power cord into a live electrical outlet.
•
Check the fuse or reset the circuit breaker.
•
Close the door and press the
Start/Pause
button to start your
washer.
For your safety, your washer will not tumble or spin unless the door is
closed.
•
Before your washer starts to fill, it will make a series of clicking noises
to check the door lock and do a quick drain.
•
There may be a pause or soak period in the cycle. Wait briefly and it
may start.
•
Check the screens on the inlet hoses at the faucets for obstructions.
Clean the screens periodically.
WF350AN-02833B_EN.indd 29
2010-04-06 ¿ÀÀü 10:08:08