Engl
ish
English
17
A
Pump type (applicable models only)
1.
Open the
hose cap (A)
, and insert the drain hose.
Tighten the drain hose using the joint ring.
NOTE
• The position (side or rear) of the drain outlet depends
on the model.
• Availability of the hose cap depends on the model.
2.
Connect the other end of the drain hose to a
standpipe or basin that is positioned 90-100 cm (*)
from the floor.
WARNING
Make sure the end of the drain hose is not submerged
by water. Otherwise, the washing machine may suffer
serious damage.
CAUTION
• Do not exceed
3 m (*)
for the total length of extended
hoses.
• Do not let the drain hose run over doorsills that
protrude
5 cm (**)
or more from the floor.
Untitled-3 17
2023-03-02 4:40:20