20_installation & maintenance
CAUTIONS WHEN INSERTING THE DRAIN HOSE
Less than 3 m
1.
Don’t exceed more than 3 m when the
drain hose is used by connecting with
other hoses.
2.
Be careful to drain water out at the end of
the drain hose.
Less than 3 m
Less than
5 cm
3.
The doorsill shoudn’t be more than 5cm.
4.
Don’t install the drain hose underneath the
wash machine.
Test run
Make sure that you install your washing machine correctly by running the
Rinse
+
Spin
cycle
after the installation is complete.
CALIBRATION MODE
Your Samsung washing machine detects the laundry weight automatically.
For more accurate weight detection, please run Calibration Mode after the installation.
To run Calibration Mode, follow these steps:
1.
Remove laundry or any contents in the machine.
2.
Press the
Delay End
and
Spin
buttons simultaneously, and then press the
Power
button. The Machine
turns on with “
Cb
”
3.
Press the
Start/Pause
button to activate “
Calibration Mode
”.
4.
The drum rotates for approximately 4 minutes.
5.
When “
Calibration Mode
” is fi nished, “
End
” appears on the display, and the machine automatically
turns off. The washing machine is now ready for use.
installation & maintenance
F700S_W3050_WA18F7-03271E_EN.indd Sec6:20
F700S_W3050_WA18F7-03271E_EN.indd Sec6:20
2013-04-02
2:49:42
2013-04-02
2:49:42