Engl
ish
Installation
English
14
CAUTION
Do not stretch the water hose by force. If the hose is too short, replace the hose with a longer, high-
pressure hose.
Connecting to a non-threaded water tap (applicable models only)
A
B
1.
Remove the
adaptor (A)
from the water
hose (B)
.
2.
Use a Phillips screwdriver to loosen four screws on
the adaptor.
C
3.
Hold the adaptor and turn
part (C)
in the arrow
direction to loosen it by 5 mm (*).
C
4.
Insert the adaptor onto the water tap, and then
tighten the screws while lifting the adaptor.
5.
Turn
part (C)
in the arrow direction to tighten it.
Untitled-16 14
2023-03-27( ) 10:44:49