14 _ Disassembly and Reassembly
Part
Figure
Description
Sensor Pressure Switch
1. Disassemble the control panel assembly.
2. Separate the pressure switch housing.
3. Before separating the hose, release the clip.
When releasing the clip, take care that
you do not tear the hose.
Drain-Pump
1
3
5
2
4
6
1. Separate the back cover.
2. Separate 2 clamps.
3. Remove COVER PUMP.
4. Separate 2 pins.
5. Remove the 13 screws in base.
6. Remove the 3 screws.
7. screws are separated by ‘+’ shape hand driver.