34 English
W
ashing a load o
f laundry
Washing a load of laundry
NOTE
Adding laundry when Child Lock is on
To add laundry, deactivate the Child Lock
function. To deactivate the Child Lock
function, press and hold
Spin
and
Soil Level
simultaneously for at least 3 seconds. See
the “
Pause Option
” section on page
37
for
additional details.
Deactivating the Child Lock function
Press and hold both
Spin
and
Soil Level
simultaneously for approximately 3 seconds.
•
When you deactivate the Child Lock
function, the
Child Lock
indicator is
turned off.
•
The Child Lock function prevents
children or the infirm from accidently
operating the washer and injuring
themselves.
WARNING
If a child enters the washer, the child may
become trapped and suffocate.
CAUTION
•
Once you have activated the Child Lock
function, it continues working even if
the power is turned off.
•
Forcing the lid open can result in injury
or damage to the product.
NOTE
To add laundry after you have activated
the Child Lock function, you must first
deactivate the Child Lock function.
Sound
The Sound Off function can be selected
during all cycles.
Garment Plus
You can add or take out laundry items even
after the wash has started, as long as the
Garment Plus
indicator is on. Pressing
Start/Pause
unlocks the lid. If you open the
lid and want to continue the wash cycle,
close the lid, and then press
Start/Pause
.
NOTE
If you have activated the Child Lock, you
must deactivate it first. See page
33
.
My Cycle
Lets you save a custom wash cycle
(temperature, spin, soil level, etc.) and
then recall and use it with one button
convenience.
To save a cycle and selected options as your
My Cycle, follow these steps:
1.
Press
Power
.
2.
Select a cycle using the
Cycle Selector
.
3.
After cycle selection, set each option.
NOTE
See the “
Cycle chart
” section on page
61
for
available option settings with each cycle.
4.
You can then store the selected cycle
and options by pressing and holding
My Cycle
for longer than 3 seconds.
The cycle and options you select will be
displayed the next time you choose the
My Cycle function.
5.
Press
My Cycle
to load and use the
saved My Cycle options. The “My Cycle”
light will indicate activation. Also, the
chosen cycle and option lights will
flicker.
NOTE
You can change the My Cycle settings by
repeating the process above.
The last saved settings will be displayed the
next time you choose the My Cycle function.
NOTE
If you press
My Cycle
and release it within
3 seconds, the previously saved cycle and
options appear. If you press and hold
My
Cycle
for 3 second or longer, the currently
set cycle and options are saved and the LED
blinks for 3 seconds.
Delay End
You can set the washer to start your wash
automatically at a later time, by choosing a
delay time.
The hour displayed indicates the time at
which the wash will be ended.
1.
Set your wash cycle.
2.
Press
Delay End
repeatedly until the
delay time is set.
3.
Press
Start/Pause
. The “Delay End”
indicator will be lit, and the clock will
begin counting down until it reaches the
set time.
4.
To cancel a Delay End function, press the
Power button and then turn the washer
on again.
Pre Soak
Use this function when the laundry is
heavily contaminated or stained. This
function improves the wash performance by
adding a Pre Soak cycle.
•
If you select this function, the total cycle
time is increased by 18 minutes.
WA7700K_WA45K-03520S-00_EN.indd 34
2015/12/16 19:08:30
