62
HDMI-CEC issues
does not work.
Check if the device is an device. The system supports devices only.
Check if the device power cord is properly connected.
Check the device’s Video/Audio/HDMI cable connections.
Check whether
(HDMI-CEC)
is set to
On
in
Setting
→
Administative
→
Control
Check whether the remote control is compatible.
doesn’t work in certain situations. (initial setup)
If you have removed and then reconnected the HDMI cable, please make sure to search
devices again or turn your product off and on again.
Check if the function of the Anynet device turns on.
I want to start .
Check if the device is properly connected to the product and check if
(HDMI-CEC)
is set to
On
in
Menu
→
SETTINGS
→
External Device Manager
.
I want to exit .
Press the
SOURCE
button on the product remote control and select a non- device.
The message “
Disconnecting device...
”
appears on the screen.
You cannot use the remote control when you are configuring or switching to a view
mode.
Use the remote control after the product has completed configuration or has
finished switching to .
The device does not play.
You cannot use the play function when initial setup is in progress.