5
3.
Press the START/HOLD button
Water level is selected automatically.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
WASHING PROCEDURE
Selects the best washing course
automatically.
1.
Press the POWER Button to"ON".
2.
Press the START/HOLD button
.
Water level is selected automatically.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
3.
Close the lid.
POWER
START/HOLD
FUZZY COURSE
Before starting washing, check the following;
Connect the water supply hose to the water tap. Leave a tap open.
Plug the power cord in. Make sure to lay down the drain hose.(In case no drain pump)
Put the laundry into the washer and add detergent,too.
Be careful not to overload. Use right detergent for the fabrics you are washing.
The laundry is soaked in water so that the
dirt can be eliminated completely.
POWER
START/HOLD
FUNCTION
1.
Press the POWER button to "ON".
2.
Press the FUNCTION select button once.
SOAK COURSE
START/HOLD
FUNCTION
POWER
1.
Press the POWER button to "ON".
4.
Close the lid.
3.
Press the START/HOLD button
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/HOLD button
again.You can change the course when paused.
2.
Press the COURSE select button twice.
Because washing is speedy, it is
good for light or less stained laundry.
SPEEDY COURSE
4.
Close the lid.
WA7010 DC68-00701A 10/24/01 9:27 AM Page 6
