●
When a proper amount (one time does) of fabric
softener is stored in the softener inlet,it is
automatically put in at the last rinsing cycle.
●
Do not use detergent, bleach or starch into
the Softener Inlet.
●
Using too much softener may produce
unsatisfactory results.
●
Do not open the lid during the Spin Dry cycle.
If added too early, its effectiveness will decrease.
●
Do not leave the softener
into the Softener
Dispenser for a long time.
Because softner
became stiff.
8
1
. Place a rag under the washer filter not to wet the floor.
2
. Rotate the filter counterclockwise and pull out the filter.
3
. Remove dirts and rotate the filter clockwise until it locks in position.
HOW TO CLEAN THE FILTER
TROUBLESHOOTING
Washing machine won't work
Is the water tap opened?
Is the washer plugged in?
Is the power cut off?
Is there enough water?
Is the water tap opened?
Is the water cut off?
Is the water supply hose or hose
connection clogged?
Is the water tap frozen?
If water is not supplied in 1 hour,a
buzzer will sound.
Water is not supplied
Spinning does not work
Is the laundry spread out evenly
in the washer?
Is the washer set on a sturdy
flat surface?
Water is overflowed
Restart after spinning.
If the error sign still indicates,
call agency.
Water dose not drain
Is the drain hose down?(No pump)
Is the drain hose frozen?
Is the drain hose clogged?
If the water dose not drain in 6
minutes, a buzzer will sound.
CLEANING THE MAGIC FILTER
HOW TO ADD THE FABRIC SOFTENER
1. Push the upper part
of the filter and pull in.
2. Open the cover as
shown in the figure.
3. Clean the filter.
4. Close the cover and insert t
he lower part of the filter in the
basket first and then push the
filter with "click" sound .
Pour it slowly
ure.
WA7010 DC68-00701A 10/24/01 9:27 AM Page 9
