18 English
Ins
tallation
Installation
A
Pump type
1.
Open the
hose cap (A)
, and insert the
drain hose. Tighten the drain hose using
the joint ring.
NOTE
•
The position (side or rear) of the drain
outlet depends on the model.
•
Availability of the hose cap depends on
the model.
2.
Connect the other end of the drain hose
to a standpipe or basin that is positioned
90-100 cm (*) from the floor.
WARNING
Make sure the end of the drain hose is
not submerged by water. Otherwise, the
washing machine may suffer serious
damage.
WA6000T_WA90T6250_DC68-04152J-00_EN.indd 18
2021-11-18 12:37:46