Samsung WA91R3, User Manual

10

WATER SUPPLY CONNECTOR FILTER

1.Pull out the filter and wash well.

2. Pull in the filter and connect

the hose to the inlet water 
valve tightly.

inlet water 
valve

3. Check if there is a leakage.

Note to tighten up the 

connector.

CLEANING THE FILTER NET

Clean the filter net often to keep the washer clean.

1. Push the upper part

of the filter and pull in.

2. Open the cover as 

shown in the figure.

3. Clean the filter.

4. Close the cover and insert the 

lower part of the filter in the 
basket first and then push the 
filter with "click" sound .

HOW TO CLEAN THE FILTER

1. Place a rag under the washer filter not to wet the floor.
2. Rotate the filter counterclockwise 

and pull out the filter. 

3. Remove dirts and rotate 

the filter clockwise 
until it locks in position.

(pump drained washer)
1.Place a rag under washer filter not to wet the floor.
2.Turn the filter-cap to the left.
3.Take the filter out and 

remove dirts.

4. Reassemble in 

reverse order.

1. Push up and 

pull out the filter net.

2. Remove the collected

lint from the filter net.

3. Clean the filter.

4.  Pull down the filter net.

open

close