English
43
Operations
Delay End
You can set the washing machine to finish your wash automatically at a later time,
choosing a delay of between 1 to 24 hours (in 1 hour increments). The hour displayed
indicates the time the wash will finish.
1.
Select a cycle with necessary settings.
2.
Press
Delay End
repeatedly until a desired end time is set.
3.
Press and hold
Start/Pause (Hold to Start)
. The Delay End indicator blinks and the
washing machine tumbles the drum to sense the weight of the load if load sensing is
preset for the selected cycle. When complete, it displays your set time with the timer
running.
4.
To cancel the Delay End, restart the washing machine by pressing
Power
.
Real-life case
You want to finish a two-hour cycle 3 hours later from now. For this, you add the Delay
End option to the current cycle with the 3-hour setting, and Press and hold
Start/Pause
(Hold to Start)
at 2:00 p.m. Then, what happens? The washing machine starts operating at
3:00 p.m., and ends at 5:00 p.m. Provided below is the time line for this example.
2:00 pm
Set Delay End to 3 hours
3:00 pm
Start
5:00 pm
End
Load sensor
The load sensor icon lights up when you select a cycle that supports load sensing. Some
cycles may not support loading sensing. Once you start the cycle, the icon blinks or stays
solid during the load sensing process, and turns off when the process is complete.
Untitled-13 43
2019-06-17 PM 4:35:37
