14_
Washing a load of laundry
CHILDLOCK (BUTTON LOCK FUNCTION)
Is a function for children not to handle the washing machine.
Setting/Release
If you want to set up or release that function, press both
Temperature
and
Rinse
buttons at the
same time in 3sec.
How to Set up:
1.
It can be set up during the power-on or operation of the washing machine.
2.
If you set up the “
CHILDLOCK
” function during the laundry operation, no button except for
Power
button can be controlled until you release that function.
3.
The CHILDLOCK lamp will be lighted.
1. In case the power is on again, the “
CHILDLOCK
” function remains unchanged.
2. In case of releasing that function, follow the way of release mentioned above.
3. When the other buttons, except for the
Power
button, are not controlled after you turn
on the Power , check CHILDLOCK LAMP, please.
WASHING CLOTHES MANUALLY
You can wash clothes manually without using the Fuzzy Logic feature.
To do so:
1.
Turn the water supply on.
2.
Press the
Power
button on the washing machine.
3.
Open the door.
4.
Load the articles one at a time loosely into the drum, without overfilling.
5.
Close the door.
6.
Put the detergent and, if necessary, softener or prewash detergent, in the appropriate
compartments.
7.
Press the Temperature button to select the temperature.
220 V
Cold, 40˚C, 60˚C, 75˚C, 95˚C
120 V
Cold, 30˚C, 40˚C, 55˚C, 70˚C
8.
Press to
Rinse
button to select the required number of rinse cycles.
Maximum number of rinse cycles is five.
The washing duration will be prolonged accordingly.
9.
Press the
Spin
button to select the spin speed.
10.
Press the
Delay Start
button repeatedly to cycle through the available delayed start options
(up to 24 hours maximum in one hour increments.). Displayed hours means the time of
finished washingcycle.
11.
Press the
Start/Pause
button and the machine will begin the cycle.
washing a load of laundry
WD6122CK-02384Q_EN.indd 14
2007-05-04 ¿ÀÈÄ 6:04:42
