background image

English  7

Saf
ety inf

ormation

Critical installation warnings

WARNING

The installation of this appliance must be performed by a qualified technician or service 
company.

• 

Failure to do so may result in electric shock, fire, an explosion, problems with the product, 
or injury.

The appliance is heavy, therefore take care when lifting it.

Plug the power cord into an AC 220 - 240 V / 50 Hz wall socket or higher and use the socket 
for this appliance only. Never use an extension cord.

• 

Sharing a wall socket with other appliances using a power strip or extending the power 
cord may result in electric shock or fire.

• 

Ensure that the power voltage, frequency, and current are the same as those of the 
product specifications. Failure to do so may result in electric shock or fire. Plug the power 
plug into the wall socket firmly.

Remove all foreign substances such as dust or water from the power plug terminals and 
contact points using a dry cloth on a regular basis.

• 

Unplug the power plug and clean it with a dry cloth.

• 

Failure to do so may result in electric shock or fire.

• 

Plug the power plug into the wall socket so that the cord is running towards the floor. 
If you plug the power plug into the socket in the opposite direction, the electric wires 
within the cable may be damaged and this may result in electric shock or fire.

Keep all packaging materials out of the reach of children as these may be dangerous.

• 

If a child places a bag over its head, it may suffocate. 
When the appliance, power plug or power cord is damaged, contact your nearest service 
centre.

This appliance must be properly grounded.

Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

• 

This may result in electric shock, fire, an explosion, or problems with the product.

• 

Never plug the power cord into a socket that is not grounded correctly and make sure 
that it is in accordance with local and national regulations. 

Do not install this appliance near a heater or any inflammable material.

Do not install this appliance in a humid, oily or dusty location, or in a location exposed to 
direct sunlight or water (rain drops).

Do not install this appliance in a location exposed to low temperatures.

• 

Frost may cause the tubes to burst.

WD80K5B10OW_03882D-01_EN.indd   7

2018/3/8   15:50:51

Summary of Contents for WD70K5 Series





































































Reviews: