washing a load of laundry
_23
02 W
ASHING A LOAD OF LAUNDR
Y
Washing clothes using the cycle selector
Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control”
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1.
Turn on your sink’s water tap.
2.
Press the
Power
button.
3.
Open the door.
4.
Load the articles one at a time loosely into the drum, without overfilling it.
5.
Close the door.
6.
Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
Pre-wash is only available when selecting the Cotton, Synthetics, Denim, Sports Wear, and
Daily Wash cycles. It is only necessary if your clothing is heavily soiled.
7.
Use the
Cycle Selector
to select the appropriate cycle according to the type of material:
Cotton, Synthetics, Denim, Sports Wear, Delicates, Wool, Hand Wash, Daily Wash, Quick
29’. The relevant indicators will illuminate on the control panel.
8.
At this time, you can control the wash temperature, the amount of rinses, the spinning
speed, and the delay time by pressing the appropriate option button.
9.
Press the
Start/Pause
button and the wash will begin. The process indicator will light up
and the remaining time for the cycle will appear in the display.
Pause Option
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1.
Press the
Start/Pause
button to unlock the door.
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2.
After closing the door, press the
Start/Pause
button to restart the wash.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1.
Open the door.
2.
Remove laundry.
Washing clothes manually
You can wash clothes manually without using the Cycle Selector.
1.
Turn the water supply on.
2.
Press the
Power
button on the washing machine.
3.
Open the door.
4.
Load the articles loosely into the drum one at a time, without overfilling it.
5.
Close the door.
6.
Add detergent and, if necessary, softener or prewash detergent, into the appropriate
compartments.
7.
Press the
Temp.
button to select the temperature. (Cold water, 30 ˚C, 40 ˚C, 60 ˚C, 95 ˚C)
8.
Press the
Rinse
button to select the required number of rinse cycles.
The maximum number of rinse cycles is five.
The wash duration is increased accordingly.
9.
Press the
Spin
button to select the spin speed.
The rinse hold function allows you to remove items that are still wet from the washing
machine. ( : No Spin,
: Rinse Hold)
10.
Press the
Delay End
button repeatedly to cycle through the available Delay End options
(from 3 hour to 19 hours in one hour increments). The hour displayed indicates the time at
which the wash will be finished.
11.
Press the
Start/Pause
button and the machine will begin the cycle.
WD8704RJ-02718A_EN.indd 23
2009-06-10 ¿ÀÈÄ 2:18:15
