![background image](http://html.mh-extra.com/html/samsung/wec8050/wec8050_operation-manual_340974229.webp)
CHAPTER 4. AP Connection Management
© SAMSUNG Electronics Co., Ltd.
page 229 of 689
4.2.8.5
Restarting and Upgrading AP
After downloading the AP package, APs in the remote group are restarted so that they can
run on the upgraded version.
Configuration using CLI
Example:
WEC8500# configure terminal
WEC8500/configure# ap-group rUpgrade
WEC8500/configure/ap-group rUpgrade# remote
WEC8500/configure/ap-group rUpgrade/remote# reboot upgrade
CLI for checking configuration:
WEC8500# show remote-ap-group upgrade config rUpgrade
================== Remote Ap Group Upgrade Config =================
Group Name : rUpgrade
Enable : Enable
Type
: Default
Mode
: FTP
Path
: package/ap
PortNum : 21
MAXretries : 3
ForceOption : Disable
weafama : ap_1 (APID:1, IP:10.10.10.160)
: weafama_1.7.0.U.bin (1.7.0.U)
weafamb : (APID:0, IP:0.0.0.0)
: ()
WEC8500# show remote-ap-group upgrade list rUpgrade
/* (RC/FR/RC) : RetryCount/FailReason/RebootCause
AP_ID Model Version(config/current) Status(RC/FR/RC) MasterAp
1 WEA303i Remote/1.7.0.U Success( 0/ 0/128) MasterApCfg
2 WEA312i Remote/1.7.0.U Success( 0/ 0/146) -
3 WEA303i Remote/1.7.0.U Success( 0/ 0/146) -