![background image](http://html.mh-extra.com/html/samsung/wec8050/wec8050_operation-manual_340974236.webp)
CHAPTER 5. WLAN Management
© SAMSUNG Electronics Co., Ltd.
page 236 of 689
Parameter
Description
CAPABILITIES
- link-measurement
- neighbor-report
- beacon-passive-measurement
- beacon-active-measurement
- beacon-table-measurement
- statistics-measurement
- ap-channel-report
12) Configure whether to permit TDSL for WLAN of Local bridging mode. Default is
disable.
[no] tdls-blocking
Configuration using Web UI
In the menu bar of
<WEC Main window>
, select
<Configuration>
and then select the
<WLANs>
menu in the sub-menus. For more information about configuration, see ‘5.1
Basic WLAN Configuration’.
5.1.3
WLAN-based ACL Configuration
To configure ACL to apply to the WLAN service, define IP-based ACL first and then
configure it to the WLAN.
Configuration using CLI
The procedures for configuration are as follows.
1) Before applying ACL, retrieve ACL that is configured as WLAN ACL.
WEC8500# show running-config network
fqm-mode
…
ip access-group wireless acl1
!
2) Go to configure
wlan configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wlan 1
WEC8500/configure/wlan 1
WEC8500# configure terminal
WEC8500/configure# wlan 1
WEC8500/configure/wlan 1