![background image](http://html.mh-extra.com/html/samsung/wec8050/wec8050_operation-manual_340974461.webp)
CHAPTER 9. IP Application
© SAMSUNG Electronics Co., Ltd.
page 461 of 689
Parameter
Description
INDEX
Server index (range: 1-5)
Configure the version of a server that a NTP client will refer to. (Use a default value 1 if it
is not configured.)
ntp client server-addr hostname <WORD> version [1-4]: Enable
no ntp client server-addr hostname <WORD> version [1-4]: Disable
[Configuring based on IP address]
Enable or disable.
ntp client server-addr ip <A.B.C.D>: Enable
no ntp client server-addr ip <A.B.C.D>: Disable
Configure the index of a server that a NTP client will refer to. (Use a default value 1 if it is
not configured.)
ntp client server-addr ip <A.B.C.D> index [1-5]: Enable
no ntp client server-addr ip <A.B.C.D> index [1-5]: Disable
Configure the version of a server that a NTP client will refer to. (Use a default value 1 if it
is not configured.)
ntp client server-addr ip <A.B.C.D> version [1-4]
no ntp client server-addr ip <A.B.C.D> version [1-4]
You can proceed with configurations simultaneously as shown below.
ntp client server-addr hostname <WORD> index [1-5] version [1-4]
ntp client server-addr hostname <WORD> version [1-4] index [1-5]
ntp client server-addr ip <A.B.C.D> index [1-5] version [1-4]
ntp client server-addr ip <A.B.C.D> version [1-4] index [1-5]
no ntp client server-addr hostname <WORD> index [1-5] version [1-4]
no ntp client server-addr hostname <WORD> version [1-4] index [1-5]
no ntp client server-addr ip <A.B.C.D> index [1-5] version [1-4]
no ntp client server-addr ip <A.B.C.D> version [1-4] index [1-5]
[NTP Server Configuration]
The NTP server configuration is as follows:
1) Go to the configure mode of the CLI.
WEC8500# configure terminal