WEC8500/8050 Maintenance Manual
Version 5.1
Samsung Electronics America
page 54 of 87
2.3.3
Max clients restriction function does not work
Symptoms
Max clients restriction function for each wireless band or each WLAN is not working and
associations are permitted.
Possible Causes
There is an error with the connection (CAPWAP) between the APC and the AP.
Max clients restriction setting of the AP is incorrect.
Solutions
1) Check the ‘State’ of CAPWAP. If the state is not normal (‘1/1/5’), solve the problem
by referring to ‘CAPWAP Status is not RUN’
WEC8500# show ap summary
AP Mgmt interface IP: 100.100.100.1 (vlan1.200)
AP_ID CFG_NAME AP_Name Mac_Address IPv4Addr
State
1 ap_1 AP_f4d9fb23c3f9 00:11:22:33:44:55 100.100.100.38
1/1/5
2) Check the max client restriction setting of AP.
5 GHz:
AP# show config radio interface1 max_radio_clients
Allowed max clients per radio .................... 127
2.4 GHz:
AP# show config radio interface2 max_radio_clients
Allowed max clients per radio .................... 127
5 GHz/WLAN ID 1:
AP# show config wlan bss_1_1 max_bss_clients
Allowed max clients per bss ...................... 127
3) If the setting is different from that of the APC, check step 1) first.
If the CAPWAP state is normal (‘1/1/5’), reset the access restriction by referring to the
APC Operation Manual.
4) Contact the system administrator
