WEC8500/8050 Maintenance Manual
Version 5.1
Samsung Electronics America
page 56 of 87
Checking and Solving the Problem
1) From the APC, try to ping the AP’s IP address.
[Pinging from APC to AP]
Check whether the APC can ping the AP’s IP address, and check that there is no
problem with the network settings.
WEC8500# ping 100.100.100.10
AP’s IP address is 100.100.100.10
ping 100.100.100.10
PATTERN: 0x2505
PING 100.100.100.10 (100.100.100.10) 64(92) bytes of data.
72 bytes from 100.100.100.10: icmp_seq=1 ttl=64 time=0.089 ms
72 bytes from 100.100.100.10: icmp_seq=2 ttl=64 time=0.055 ms
72 bytes from 100.100.100.10: icmp_seq=3 ttl=64 time=0.066 ms
72 bytes from 100.100.100.10: icmp_seq=4 ttl=64 time=0.060 ms
72 bytes from 100.100.100.10: icmp_seq=5 ttl=64 time=0.068 ms
--- 100.100.100.10 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 1998ms
rtt min/avg/max/mdev = 0.055/0.067/0.089/0.014 ms
If ping fails, connect to the AP from the console to check the current IP setting
information and check the AP
APC network connection.
AP# show config interface summary
Check the network setting
information
Name ............................................. br0
Mode ............................................. Static
MAC .............................................. F4:D9:FB:24:31:41
IP address ....................................... 10.10.10.107
Subnet Mask ...................................... 255.255.255.0
Gateway address .................................. 10.10.10.1
PHY Status ....................................... UP
Interface Status ................................. UP
AP# show config network summary
Check the network status information
APC Count ........................................ 0
DNS Count ........................................ 0
NTP Mode ......................................... OFF
NTP Count ........................................ 0
TimeZone ......................................... Asia/Seoul
Network test target .............................. gw
Network test interval ............................ 20
Network test idle interval ....................... 1
Network test duplication interval ................ 20
Network test result .............................. Success
Network test mode ................................ Static
