WEC8500/8050 Maintenance Manual
Version 5.1
Samsung Electronics America
page 72 of 87
CHAPTER 5.
Wi-Fi Management
This chapter describes the problems which could occur concerning various settings for the
wireless interface using Wi-Fi.
5.1 Problem with Radio Settings
Symptoms
Radio settings for 802.11a, 80211.bg, 802.11n, etc. cannot be configured on the AP.
Possible Causes
The AP is not connected.
CAPWAP state of the AP is not RUN (5)
Solutions
1) Execute the ‘show ap summary’ command to check that the AP is connected.
If the AP is shown, setup the AP by referring to AP Settings.
WEC8500# show ap summary
AP Mgnt interface IP : 10.64.55.1 (vlan1.192)
AP_ID CFG_NAME AP_NAME MAC_Address IPv4Addr State Location
====== ======== ================ ================ ============= ===== =========
1 ap_1 AP_f4d9fb23d049 f4:d9:fb:23:d0:49 10.64.55.103 1/1/5
2 ap_2 AP_f4d9fb23cfc9 f4:d9:fb:23:cf:c9 10.64.55.57 1/1/5
3 ap_3 AP_f4d9fb23cbf9 f4:d9:fb:23:cb:f9 10.64.55.102 1/1/5