manualshive.com logo in svg

Samsung WEC8500, Operation Manual

The Samsung WEC8500 Maintenance Manual is essential for the proper care and upkeep of your device. Easily download this comprehensive manual for free from 88.208.23.73:8080, ensuring you have all the necessary information to keep your Samsung WEC8500 in optimal condition for years to come.

Share
Download
background image

CHAPTER 10. System Management 

©  SAMSUNG Electronics Co., Ltd. 

page 548 of 689

 

 

MAC_AUTH_REJECT                   0          0          0          0 
MANUAL_KICKOUT                    0          0          0          0 
MALICIOUS_STA_STATISTICS        0          0          0          0 
KICKOUT_MAC_FILTER               0          0          0          0 
KICKOUT_INVALID_IP               0          0          0          0 
KICKOUT_ACL                       0          0          0          0 
INTER_APC_HO                      0          0          0          0 
CLUSTER_DOWN                      0          0          0          0 
VAP_DOWN                          0          0          0          0 
 
DeauthInReason 
Reason                          Total      5Min       1Hour      1Day 
======================================================================
======== 
UNSPECIFIED                       0          0          0          0 
PREV_AUTH_NOT_VALID              0          0          0          0 
DEAUTH_LEAVING                    0          0          0          0 
DISASSOC_DUE_TO_INACTIVITY      0          0          0          0 
DISASSOC_AP_BUSY                  0          0          0          0 
CLASS2_FRAME_FROM_NONAUTH_STA  0          0          0          0 
CLASS3_FRAME_FROM_NONASSOC_STA 0          0          0          0 
DISASSOC_STA_HAS_LEFT            0          0          0          0 
STA_REQ_ASSOC_WITHOUT_AUTH      0          0          0          0 
PWR_CAPABILITY_NOT_VALID        0          0          0          0 
SUPPORTED_CHANNEL_NOT_VALID    0          0          0          0 
INVALID_IE                        0          0          0          0 
MICHAEL_MIC_FAILURE              0          0          0          0 
4WAY_HANDSHAKE_TIMEOUT           0          0          0          0 
GROUP_KEY_UPDATE_TIMEOUT        0          0          0          0 
IE_IN_4WAY_DIFFERS               0          0          0          0 
GROUP_CIPHER_NOT_VALID          0          0          0          0 
PAIRWISE_CIPHER_NOT_VALID       0          0          0          0 
AKMP_NOT_VALID                    0          0          0          0 
UNSUPPORTED_RSN_IE_VERSION      0          0          0          0 
INVALID_RSN_IE_CAPAB             0          0          0          0 
IEEE_802_1X_AUTH_FAILED          0          0          0          0 
CIPHER_SUITE_REJECTED            0          0          0          0 
TDLS_TEARDOWN_UNREACHABLE      0          0          0          0 
TDLS_TEARDOWN_UNSPECIFIED      0          0          0          0 
TOO_MANY                          0          0          0          0 
STAION_RETRY_THRESHOLD          0          0          0          0 
ACL_KICKOUT                       0          0          0          0 
AUTH_IDLE_TIMEOUT                0          0          0          0 
AUTH_IN_ASSOC_STATE              0          0          0          0 
WRONG_STA                         0          0          0          0 
EXPIRED_SERVICE_TIME             0          0          0          0 
MAC_AUTH_TIMEOUT                  0          0          0          0 
MAC_AUTH_REJECT                   0          0          0          0 
MANUAL_KICKOUT                    0          0          0          0 
MALICIOUS_STA_STATISTICS        0          0          0          0 
KICKOUT_MAC_FILTER               0          0          0          0 
KICKOUT_INVALID_IP               0          0          0          0 
KICKOUT_ACL                       0          0          0          0 

Summary of Contents for WEC8500


















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WEC8500

Linkskey LKR-604 Quick Installation Manual preview
LKR-604
Brand: Linkskey Pages: 8
ALCON ACP24 User Manual preview
ACP24
Brand: ALCON Pages: 46
TP-Link Archer GX90 Setup preview
Archer GX90
Brand: TP-Link Pages: 2
Atlantis Land A07-WA6102X-2 Specification Sheet preview
A07-WA6102X-2
Brand: Atlantis Land Pages: 2
AirLive W6184QAX User Manual preview
W6184QAX
Brand: AirLive Pages: 46
GSD WC5FM2601F User Manual preview
WC5FM2601F
Brand: GSD Pages: 5
Cambium Networks PTP 550E Series User Manual preview
PTP 550E Series
Brand: Cambium Networks Pages: 250
Abocom WR254 Specifications preview
WR254
Brand: Abocom Pages: 1
Monoprice MW368R User Manual preview
MW368R
Brand: Monoprice Pages: 74
Cradlepoint CradlePoint PHS300tw Quick Start Manual preview
CradlePoint PHS300tw
Brand: Cradlepoint Pages: 2
Air Live WMM-3000R Quick Setup Manual preview
WMM-3000R
Brand: Air Live Pages: 51
AirLive WH-5400CPE User Manual preview
WH-5400CPE
Brand: AirLive Pages: 51
LogiLink WL0130 Quick Installation Manual preview
WL0130
Brand: LogiLink Pages: 9
Comtrend Corporation CT-535 User Manual preview
CT-535
Brand: Comtrend Corporation Pages: 92
Comtrend Corporation WAP-EN1750R User Manual preview
WAP-EN1750R
Brand: Comtrend Corporation Pages: 88
Xirrus X2 Series Quick Installation Manual preview
X2 Series
Brand: Xirrus Pages: 36
Ubiquiti airFiber AF-11FX Quick Start Manual preview
airFiber AF-11FX
Brand: Ubiquiti Pages: 47
Juplink RX4-1800 User Manual preview
RX4-1800
Brand: Juplink Pages: 65

Brands by name

Popular brands

Load more brands