CHAPTER 8. Security
© SAMSUNG Electronics Co., Ltd.
page 378 of 689
Parameter
Description
RETRY_INTERVAL
Retransmission interval for a RADIUS message
(unit: seconds, range: 1-60, default value: 2)
RETRY_COUNT
Maximum retransmission count of a RADIUS message
(range: 1-20, default value: 10)
FO_RETRY_COUNT
Maximum retransmission count of a RADIUS message before
a RADIUS server failover is attempted
Must smaller than the RETRY_COUNT value (range: 1-10,
default value: 3)
7) Enable or disable CoA (Change of Authorization) .
WEC8500/configure/security/radius 1# [no] coa
8) Exit RADIUS server configuration and security configuration mode.
WEC8500/configure/security/radius 1# exit
WEC8500/configure/security# exit
9) To check the configuration information, use the ‘show security radius-server summary’
command.
Configuration using Web UI
In the menu bar of
<WEC Main window>
, select
<Configuration>
and then select the
<Security>
<AAA>
<RADIUS>
menu in the sub-menus.
If you click the
<Add>
button in the RADIUS initial window, you can add a RADIUS
server.
The server addition window is shown below.
Figure 197. RADIUS server configuration
