60
43
DRUM
WASHER
(MODEL
NAME :Q1*3*)
water supply
related
Water being supplied little
General
consulting
It may appear when the tap is not opened
properly or there is a foreign material inside.
▶
Is it checked whether the tap is fully open or there is a foreign material
inserted?
☞
First check whether the tap is fully open. And there is no fault turn
the hose of the machine to the left to take out strainer in the hole of water
entrance. Clean i
44
DRUM
WASHER
(MODEL
NAME Q1*3*)
water supply
related
Detergent being remained
General
consulting
It may appear when the long-term used
detergent is not well soluted or when the water
temperature is low during winter.
☞
Sove the detergent wth the hot water and put it inot the washing box.
If it is not solved even with the normal detergent request an engineer's inspection.
45
DRUM
WASHER
(MODEL
NAME :Q1*3*)
water supply
related
Water being stopped during
the coming in
General
consulting
It may appear when the water is cut or the water
supply hole is clogged.
▶
Is it checked whether the water is cut or there is a foreign material inserted in
the water supply hole?
☞
First check whether the water is cut and if there is a
blackout push the power button on. Otherwise turn the machine hose to the left to
take out t
46
DRUM
WASHER
(MODEL
NAME Q1*3*)
water supply
related
Clothes being damaged
General
consulting
☞
In this case you are recommended our engineer's inspection.
47
DRUM
WASHER
(MODEL
NAME Q1*3*)
water supply
related
One direction rotation
☞
In this case you are recommended our engineer's inspection.
48
DRUM
WASHER
(MODEL
NAME Q1*3*)
water supply
related
Rotation being not worked
after it sounds with buzz
☞
In this case you are recommended our engineer's inspection.
49
DRUM
WASHER
(MODEL
NAME Q1*3*)
water supply
related
Water being not supplied in
winter
It may appear when the tap and the water supply
hose are frozen if it is used at the veranda in the
winter.
☞
Make the water supply hole warm and defreeze it with wet towel.
50
DRUM
WASHER
(MODEL
NAME :Q1*3*)
rinsing related
Rinse being not put in tub
General
consulting
It may appear when the rinse agent remains to
clog .
▶
Did the rinse agent drain immediately or part to put the rinse is clogged after
putting the rinse agent?
☞
The rinse agent does not drain only when putting it up
to the reamer shaped cap which is in the box of rinse agent. If clogged take out
the cap and
51
DRUM
WASHER
(MODEL
NAME Q1*3*)
rinsing related
Bubble being remained
General
consulting
It may appear when there is too much or too little
laundry.
☞
If there is too much laundry or vinyl clothes the detergent is not solved. Reduce
the laundry or take out the vinyl clothes separately.
52
DRUM
WASHER
(MODEL
NAME Q1*3*)
water drain
related
Water being not drained
General
consulting
☞
In this case you are recommended our engineer's inspection.
53
DRUM
WASHER
(MODEL
NAME :Q1*3*)
dehydrating
related
Dehydrating time being
increased again
General
consulting
..Make a comment for the customer to
prepare the memorandum since he can
not be famaliar with the contents
completely.
The vibration and noise occur when the horizon
is broken or the laundry are leaned to one
direction. So It may appear when the safety
device is operating to prevent it.
☞
If there is too little laundry less than 1KG or the clothes in the washing tub are
severely entangled it appears.
54
DRUM
WASHER
(MODEL
NAME :Q1*3*)
dehydrating
related
Washer being worked for four
hours without stopping
Specific
consulting
If the washing machine consumes hours more
than necessary check whether the water supply
is too small. And note that that the boling and the
drying course takes much time.
☞
Check whether the water supply time is too much delayed due to the low
pressure of water or boiling or drying is selected. In other cases request an
engineer's inspection.
55
DRUM
WASHER
(MODEL
NAME Q1*3*)
dehydrating
related
Not dehydrating with the motor
being purring after water is
drained
General
consulting
The power cord for motor may be cut or the gear
shaft hardened.
☞
In this case you are recommended our engineer's inspection.
56
DRUM
WASHER
(MODEL
NAME :Q1*3*)
dehydrating
related
Being stopped with thuds
during dehydration
AS
rerecomm
ended
..Make a comment for the customer to
prepare the memorandum since he can
not be famaliar with the contents
completely.
It may appear when the horizon is broken or
there are too much clothes to wash.
☞
check the level of a washing machine.
Summary of Contents for WF-F1256
