61
57
DRUM
WASHER
(MODEL
NAME Q1*3*)
dehydrating
related
Not being squeezed well
General
consulting
It may appear when there are clothes like vinyl.
▶
Check whether the vinyl clothes are attached on to the washing tub so as to
prevent the immediate the outgoing of the moisture to the outside. Otherwise
request an engineer's inspection.
58
DRUM
WASHER
(MODEL
NAME Q1*3*)
dehydrating
related
Water being in at purchasing
AS
rerecomm
ended
☞
There may be remaining water since the products is delivered thorugh the final
products test. It is normal and you can use it without fear.
59
DRUM
WASHER
(MODEL
NAME Q1*3*)
dehydrating
related
Dehydration being not worked
at all
General
consulting
It may appear when the interior components do
not work properly.
☞
In this case you are recommended our engineer's inspection.
60
DRUM
WASHER
(MODEL
NAME Q1*3*)
others
Action for water being freezen
in winter
AS
rerecomm
ended
It may appear when the machine is used at the
outside or the veranda.
☞
pour the warm water on to the tap to take out the water suppy hose and put the
hose in to the water of approximately 50 degree. And then pour the water in to the
washing box to check whether the drain is well done.
61
DRUM
WASHER
(MODEL
NAME Q1*3*)
others
being clogged/foreign
materials
General
consulting
….the drainage hose clogged or foreign
material inside
☞
After loosening the water supply hose and check the inlet of water supply
whether there is foreign material inserted such a soil dust.
62
DRUM
WASHER
(MODEL
NAME Q1*3*)
installation /
connection
Consulting for installation of
front loading washing machine
General
consulting
☞
The drum washing machine is leveled after removing the safety device at the
rear of drum. And for a removing the safety device refer to accessories and user's
manual.
63
DRUM
WASHER
(MODEL
NAME Q1*3*)
installation /
connection
Level check
Specific
consulting
☞
Level it by use of a leveller(with a coin weight) at the front.
64
DRUM
WASHER
(MODEL
NAME :Q1*3*)
installation /
connection
Removal/house moving
reinstallation
Specific
consulting
☞
It is possible to remove and install in the house but when moving to the other
house and installing it assemble the safety device at the back while moving and
remove it after moving. If the drum is shaken during the moving it causes a
serious damage.
65
DRUM
WASHER
(MODEL
NAME Q1*3*)
washing related
Slow speed of washing
rotation
General
consulting
It may appear when there is too much laundry.
▶
Check whether the laundry is input over the proper amount. Otherwise request
an engineer's inspection.
66
DRUM
WASHER
(MODEL
NAME :Q1*3*)
washing related
Clothes being damaged
General
consulting
Check whether there is foreign material inside
(coin nail and other sharp material) and so it may
appear due to the zipper or button of jeans.
☞
Check whether there is foreign material in the washing tub. In case of
dehydrating the weak material cothes it shall be inserted in the net during
dehydrating. Any other cleaning agent (decoloration agent) shall not be used
except the detergent and rins
Summary of Contents for WF-F1256
