20_
setting up your washing machine
setting up your washing
machine
Connecting the drain hose
The end of the drain hose can be positioned in three ways:
1.
Over the edge of a wash basin:
The drain hose must be placed at a height of between 60 and
90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide
to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving.
2.
ln a sink drain pipe branch:
The drain pipe branch must be above the sink siphon so that
the end of the hose is at least 60 cm above the ground.
3.
ln a drain pipe:
We recommend using a 65 cm high vertical
pipe; it must be no shorter than 60 cm and no longer than
90 cm.
The standpipe drain requires;
• minimum diameter 5 cm.
• minimum carry-away capacity 60 liter per minute.
STEP 5
Powering your washing machine
Plug the power cord into a wall sockets, an AC 220-240V / 50Hz approved electrical outlet
protected by a fuse or circuit breaker. (For more information on electrical and grounding
requirements, see page 14.)
Test run
Make sure that you install your washing machine correctly by running the
Rinse+Spin
cycle
after the installation is complete.
STEP 6
Select the Language (selected LCD models)
At the beginning setting (After power on), the “Language setting” message
appears on the display. you can select one language among English, French,
Dutch, German, Italian, or Spanish.(Polish, Russian, Turkish, Chinese or Thai.)
* Language selections can be changed according to derived models.
1.
Push the Rinse button to choose a language.
2.
Push the Spin button to set the chosen language.
To reselect the language, press the Rinse and Spin buttons
simultaneously for 3 seconds.
The LCD display Language may differ depending on the
model.
Drain hose
Hose guide
60 ~ 90 cm
60 ~ 90 cm
Türkçe
Polska
Poccию
ᳯᐴ
WF1124XAU-03038P-05_EN_130125.indd Sec4:20
WF1124XAU-03038P-05_EN_130125.indd Sec4:20
2013-01-25
11:30:01
2013-01-25
11:30:01
