Samsung WF1802XE, User Manual

14_

 setting up your new washing machine

setting up your washing 
machine

.&&5*/(*/45"--"5*0/3&26*3&.&/54

&MFDUSJDBMTVQQMZBOEHSPVOEJOH

To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring and grounding 
must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest 
Revision and local codes and ordinances. It is the personal responsibility of the appliance owner 
to provide adequate electrical service for this appliance.

Never use an extension cord.
Use only the power cord that comes with your washing machine.

When preparing for installation, ensure that your power supply offers:

t

220V~240V 50Hz 15 AMP fuse or circuit breaker

t

Individual branch circuit serving only your washing machine

Your washing machine must be grounded. If your washing machine malfunctions or breaks 
down, grounding will reduce the risk of electric shock by providing a path of least resistance for 
the electric current.
Your washing machine comes with a power cord having a three-prong grounding plug for use in 
a properly installed and grounded outlet.

Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.

Improperly connecting the equipment-grounding conductor can result electrical shock.
Check with a qualified electrician or serviceman if you are unsure if the washing machine is 
properly grounded. Do not modify the plug provided with the washing machine. If it does not fit 
the outlet, have a proper outlet installed by a qualified electrician.

8BUFS4VQQMZ

Your washing machine will fill properly when your water pressure is 50 kPa ~ 800 kPa. Water 
pressure less than 50 kPa may cause water valve failure, not allowing the water valve to shut 
off completely. Or, it may take the washing machine longer to fill than what the controls allow, 
resulting in your washing machine turning off. (A fill-time limit, designed to prevent overflows/
flooding if an internal hose becomes loose, is built into the controls.)

The water taps must be within 4 feet (122cm) of the back of your washing machine for the 
provided inlet hoses provided to reach your washing machine.

Most plumbing supply stores sell inlet hoses of various lengths up to 10 feet (305cm) long.

You can reduce the risk of leaks and water damage by:

t .BLJOHXBUFSUBQTFBTJMZBDDFTTJCMF
t 5VSOJOHPGGUBQTXIFOUIFXBTIJOHNBDIJOFJTOPUJOVTF
t 1FSJPEJDBMMZDIFDLJOHGPSMFBLTBUXBUFSJOMFUIPTFmUUJOHT

Before using your washing machine for the first time, check all connections at the water 
valve and taps for leaks.

8"3/*/(

8"3/*/(