Samsung WF1802XE, User Manual

washing a load of laundry 

_27

02 W

ASHING A LOAD OF LAUNDR

Y

.ZDZDMF

Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one button 
convenience.
By pushing the 

My Cycle

 button, press the My Cycle button to load and use the saved My 

Cycle options. The “My Cycle” light will indicate activation. Also, the chosen course and option
lights will flicker.
You can set all options as follows in the My Cycle mode.

1.

Turn the water supply on.

2.

Press the 

Power

 button.

3.

Select cycle using the 

Cycle Selector

.

4.

After cycle selection, set each option.

See the “Cycle Chart” on page 38 for available option settings with each cycle.

5.

You can then store the selected cycle and options by pressing and holding the 

My Cycle

button for longer than 3 seconds in My Cycle mode. The cycle and options you select will be 
displayed the next time you choose the My Cycle function.

You can change the My Cycle settings by repeating the same process above. The last used 
setting will be displayed the next time you choose the My Cycle function.

If you press My Cycle and release it within 3 seconds, the previously saved course and 
options appear. If you press and hold My Cycle for 3 second or longer, the currently set 
course and options are saved and the LED blinks for 3 seconds.

8BTIJOHDMPUIFTVTJOHUIFDZDMFTFMFDUPS

Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control” 
automatic control system. When you select a wash program, the machine will set the correct 
temperature, washing time, and washing speed.

1.

Turn on your sink’s water tap.

2.

Press the 

Power

 button.

3.

Open the door.

4.

Load the articles one at a time loosely into the drum, without overfilling it.

5.

Close the door.

6.

Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate 
compartments.

Pre-wash is only available when selecting the Cotton, Synthetics, Denim, Bedding, Dark 
Garment, Daily Wash and Baby Care cycles. It is only necessary if your clothing is heavily 
soiled.

7.

Use the 

Cycle Selector

 to select the appropriate cycle according to the type of material: 

Cotton, Synthetics, Denim, Bedding, Dark Garment, Daily Wash, Eco Drum Clean, Super Eco 
Wash, Outdoor Care, Baby Care, Wool, Hand Wash. The relevant indicators will illuminate on 
the control panel.

8.

At this time, you can control the wash temperature, the amount of rinses, the spinning 
speed, and the delay time by pressing the appropriate option button.

9.

Press the 

Start/Pause

 button and the wash will begin. The process indicator will light up 

and the remaining time for the cycle will appear in the display.

1BVTF0QUJPO

Within 5 minutes of starting a wash, it is possible to add/remove laundry items.

1.

Press the 

Start/Pause

 button to unlock the door.

The door cannot be opened when the water is too HOT or the water level is too HIGH.

2.

After closing the door, press the 

Start/Pause

 button to restart the wash.

8IFOUIFDZDMFJTmOJTIFE

After the total cycle has finished, the power will turn off automatically.

1.

Open the door.

2.

Remove laundry.