Troubleshooting
_21
Temperature sensor problem.
Restart the cycle.
If the code reappears, call for service.
High current detected.
Restart the cycle.
If the code reappears, call for service.
High/Low voltage detected.
Restart the cycle.
If the code reappears, call for service.
Vibration sensor problem.
Restart the cycle.
If the code reappears, call for service, see below
Too many suds are detected
during the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
will go back to the operation.
When it finishes washing, End and
SUdS codes will blink in turn.
To prevent it, cut down on detergents.
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
05 T
roubleshooting
WF203ANW-02463A-02_EN.indd 21
2007-07-02 ¿ÀÈÄ 8:15:04
